DTH211_EN_0210 11/02/03 11:34 Page 14
Playing a disc
Repeat playback of a scene between two points A and B
(DVD - VCD - SVCD)
1.Select the repeat playback function using the 
or 
keys.
2.Press OK to memorise the beginning of the scene you want to repeat (point A).
3.Wait a few seconds before pressing OK again to mark the end of the scene to be repeated (point B). 
or 
keys, or by pressing PLAY MODE or STOP.
Note: Repeat functions remain active until you turn them off, open the disc tray or turn off the power. Repeat play only works with discs that show the elapsed time on the display. This may not work correctly with certain discs (Video CDs in PBC mode).
Sequence marking.
Reading or deleting
amarker.
Inserting a marker.
Sequence marking (DVDs)
This function enables you to mark sequences on a disc so that you can access them easily even if you switch you player off and on again (without having ejected the disc).
You can mark up to 12 scenes per disc.
1.While a disc is being played, press INFO to display the information banner.
2.Press 
until the marking icon is highlighted.
3.Press OK to display the marking banner.
•To find a sequence, select the half disc and press OK. The half disc symbol is replaced by an arrow and a dustbin.The timer shows the place marked.
•To play a scene with a marker, select the arrow and press OK.
•To delete a marker, select the dustbin and press OK.
Note: the marking banner displays the first 6 markers. To view the other 6 markers
use the 
or 
keys on the remote control unit.
14
