EN11

PAUSE

Viewfinder Adjustment

1
Set the Power Switch to “ ” or “ ” while pressing
down the Lock Button located on the switch.
2
Pull out the viewfinder fully.
3
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
Dioptre Adjustment
Control
Power
Switch

CAUTION:

When attaching the camera to a tripod, extend its
legs to stabilise the camcorder. It is not advised to use
small sized tripods. This may cause damage to the
unit by falling over.

Tripod Mounting

1
Align the screw on the tripod with the camera’s
mounting socket. Then tighten the screw.
•Some tripods are not equipped with studs.
Lock Button