Technicolor - Thomson HP 270 To Print ALL Still Images ONE Print for Each, To Reset The Setting

EN35

Setting Print Information (DPOF Setting)

VIDEO/MEMORY

Switch

Power Switch

	Lock Button
	MENU Button
SET/SELECT	+, – Button
Button

	Display
			DPOF Menu
		SELECT
DPOF	–
		AL L
		RESET

	DPOF		Confirmation
AL L	–	CANCEL	Screen
		EXECUTE

This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing, which records information about the still images you wish to print (such as the number of prints to make). There are 2 print information settings available: “To print all still images (one print for each)” explained below and “To print by selecting still images and no. of prints” (
pg. 36).

TO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH)

1Set the VIDEO/MEMORY Switch to “MEMORY”,

then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.

2Press MENU. The Menu Screen appears.

3Press + or – to select “ MEMORY” and press SET/ SELECT. The MEMORY Menu appears.

4Press + or – to select “DPOF” and press SET/SELECT. The Sub Menu appears.

5Press + or – to select “ALL” and press SET/SELECT. Selection is complete. The Confirmation Screen appears.

6Press + or – to select “EXECUTE” and press SET/ SELECT. The normal playback screen appears.

•To cancel selection, press + or – to select “CAN- CEL” and press SET/SELECT.

To Reset The Setting . . .

.... select “RESET” in step 5. The setting is reset to 0 for

all still images.