EN37

FO MATR
FO MATR
EX STINGI
ERASE FILE
?S
ALL
EXECUTE
–CANCEL
TPROTEC
DELE ET
DPOFATFORM
NRETUR
CANCEL
EXECUTE
Display

Initialising A Memory Card

You can initialise a memory card anytime.
After initialising, all files and data stored in the memory
card, including those which have been protected, are
cleared.
1
Set the VIDEO/MEMORY Switch to “MEMORY”,
then set the Power Switch to “ ” while pressing
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder
fully.
2
Press MENU. The Menu Screen appears.
3
Press + or – to select “ MEMORY” and press SET/
SELECT. The MEMORY Menu appears.
4
Press + or – to select “FORMAT” and press SET/
SELECT. The Confirmation Screen appears.
5
Press + or – to select “EXECUTE” and press SET/
SELECT. The memory card is initialised. When
initialisation is finished, “NO FILES STORED” or
“NO SOUND FILES” appears.
•To cancel initialisation, press + or – to select
“CANCEL” and press SET/SELECT.
CAUTION:
Do not perform any other operation (such as turning
off the camcorder) during initialisation. Also, be sure
to use the provided AC Power Adapter/Charger, as the
memory card may be corrupted if the battery becomes
exhausted during initialisation. If the memory card
becomes corrupted initialise it.
MEMORY Menu
Confirmation
Screen
Power Switch
MENU Button
Lock Button
VIDEO/MEMORY
Switch
SET/SELECT
Button +, – Button