EN55

F
S
FS
FF
1 2 3
5
4
EXIT
EXPLOSION
6
SOUND
APPLAUSE

Digital Sound Effects

SOUND EFFECT MODE SELECTION

1
Load the provided memory card (墌 pg. 15) and a
cassette (墌 pg. 13).
2
Set the VIDEO/MEMORY Switch to “VIDEO”, then
set the Power Switch to “ ” or “ ” while pressing
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder
fully.
3
Press INDEX. The sound effects Index Screen
appears.
4
Press + or – to select the desired sound effect.
•Pressing D.SOUND starts playback of the currently
selected sound effect so you can check it without
recording it onto the tape. Press D.SOUND again
to stop the sound effect playback.
5
Press SET/SELECT. The selection is complete and the
selected sound effect indication is displayed.
INDEX
Button
D.SOUND
Button
Display
Selected
(framed in
green)
You can download sound data available at our Web Site (see below for URL) and transfer them from your
PC to the memory card using an optional USB cable to create more sound effects.
http://www.thomson-music.com
•Sound data should be copied into the memory card’s DCSD\100JVCGR folder.
•The file names should be in numerical sequence starting from DVC00001.mp3.
•Also, refer to the instruction manual of the provided software.
•Use the optional PC card adapter or floppy adapter to transfer sound data from a PC to the memory card.
Power Switch
Index Screen
for sound
effects
Sound effect
indication
VIDEO/MEMORY
Switch
MENU Button
Lock Button
SET/SELECT
Button
+, – Button