Technicolor - Thomson PT-AE2000E manual Lens shift and positioning, Adjusting the lens shift dials

Setting up

Lens shift and positioning

If the projector is not positioned right in front of the centre of the screen, you can adjust the projected image position by moving the lens shift dials within the shift range of the lens.

Adjusting the lens shift dials

Horizontal shift

You can place the projector where the projector lens is up to 40% horizontally off-centre from the screen and then adjust the image position with the Lens shift dial • Horizontal.

Up to about 40 %	Up to about 40 %
of the projection	of the projection

Getting Started

Turn the dial clockwise:	Turning the dial counterclockwise:
Moving to screen’s right	Moving to screen’s left

Vertical shift

You can place the projector where the projector lens is up to 100% vertically off-centre from the screen and the adjust the image position with the Lens shift dial • Vertical.

Shifting the lever down:

Moving to screen’s bottom.

Up to about 100 % of the projection

Up to about 100 % of the projection

Shifting the lever up:

Moving to screen’s top.

16 - ENGLISH