Connections
Before connecting to the projector
Read and follow the operating and connecting instructions of each peripheral device. The peripheral devices must be turned off.
Use cables that match each peripheral device to be connected.
Confirm the type of video signals. See “List of compatible signals” on page 47.
Audio cables must be connected from each peripheral device directly to the audio reproduction system.
Connecting to COMPONENT IN/VIDEO IN/S-VIDEO IN
\
Getting Started
To COMPONENT |
|
|
video output | To VIDEO output | To |
DVD player | Video player | DVD player |
Connecting to COMPUTER IN/HDMI IN
HDMI cable |
To HDMI output
RGB signal cable (Commercial item)
DVD player
Computer
NOTE:
•Make sure the HDMI cable is adapted to your HDMI device for proper performance.
•A compatible cable is required for an HDMI 1 080p signal.
•It is possible to connect with DVI devices via a HDMI/DVI conversion adapter, but some equipment may not project the image properly or other problems could be encountered. “Serial terminal” on page 48
