PICTURE menu
| AUTO ADJUST | |
COLOUR TEMPERATURE | ||
You can switch on/off the automatic adjustment | ||
You can adjust the white balance of the projected image. system in each items. | ||
Less | More |
bluish | bluish |
Setting range:
DYNAMIC IRIS
You can switch automatic adjustment of the lamp and the lens iris on/off.
ON: | Automatic adjustment |
OFF: | No adjustment |
Items | Default setting |
|
|
BLACK LEVEL ADJUST | ON |
|
|
WHITE LEVEL ADJUST | ON |
|
|
RGB ADJUST (BLACK) | OFF |
|
|
RGB ADJUST (WHITE) | OFF |
1.Press F G and select the required item.
2.Press I H and switch on/off.
3.Press F G and select AUTO and press ENTER.
The confirmation screen will be displayed.
4.Press I H and select OK.
5.Press ENTER.
Settings
WAVEFORM MONITOR
You can monitor whether or not the luminance level of the input signal is in the recommended range by displaying it in the waveform monitor. If the waveform is not in the range, adjust it for the best quality. See “Adjusting the signal condition with a waveform” on page 24.
OFF
FULL SCAN(Y)
FULL SCAN(R)
FULL SCAN(G)
FULL SCAN(B) SINGLE LINE SCAN(Y) SINGLE LINE SCAN(R) SINGLE LINE SCAN(G) SINGLE LINE SCAN(B)
MONITOR POSITION 
UPPER LEFT AUTO ADJUST
1.Press F G to move to the required waveform style.
2.Press ENTER to select.
The WAVEFORM MONITOR will be displayed. See “Adjusting the signal condition with a waveform” on page 24.
MONITOR POSITION
When the FULL SCAN is selected, press F G I H to adjust the position of the monitor.
See “Adjusting the signal condition with a waveform” on page 24.
NOTE:
•When the WAVEFORM MONITOR is set to OFF, the AUTO ADJUST is not displayed.
SPLIT ADJUST
You can perform image adjustment in some PICTURE menu items while displaying a certain area of the frozen image in a split window.
SPLIT ADJUST MODE
Select the required split style from NORMAL and REVERSE in the SPLIT ADJUST MODE menu.
NORMAL
REVERSE
