Remote control operation
Setting your own colour profile
You can adjust a selected colour | 3. Select a menu item and the I H to adjust each |
individually and save and retrieve under the | item level. |
PICTURE MODE setting. Press the | The result box is displayed on the right of the cursor |
COLOR M. button to open the menu. | and shows the adjusted colour. |
Basic Operation
PROFILE | NORMAL |
|
CURSOR
LOG
PROFILE SAVE
PROFILE DELETE
PROFILE NAME CHANGE
Create a new profile
Adjusting the selected colour
Select a colour and adjust COLOUR, TINT and
BRIGHTNESS.
1.Select the CURSOR menu and press ENTER.
The projected image is captured, and the target cursor is displayed.
When the LOG is fully stored, the target cursor will not be displayed. See “Managing stored logs” on page 26.
Target cursor
CURSOR |
|
| |
| RETURN | COLOUR | |
|
| ||
SELECT | ENTER | TINT | |
BRIGHTNESS | |||
| |||
DEFAULT | |||
| |||
|
| Adjusted colour | |
COLOUR | Adjust the vividness of the colour. | |
Setting range: | ||
| ||
TINT | Adjust the colour tone. | |
Setting range: | ||
| ||
BRIGHTNESS | Adjust the brightness of the colour. | |
Setting range: |
4. Press ENTER to store the adjusted result.
“PROCESSING” is displayed for a few seconds and the result is stored in LOG.
You can store up to 8 logs under LOG for each PICTURE MODE setting.
5.Press MENU or RETURN to return to the previous menu.
Repeat the steps above to store more adjustment.
Managing stored logs
You can edit or delete the stored logs of the selected PICTURE MODE.
1.Select LOG and press ENTER.
The LOG menu is displayed.
2.Move the cursor with F G I H to the required place to select a colour and press ENTER.
The colour at the centre of the target cursor is sampled and the sample box is displayed on the left of the cursor. The menu items are displayed on the upper part of the screen.
CURSOR
| RETURN | COLOUR | |
SELECT | ENTER | TINT | |
BRIGHTNESS | |||
DEFAULT | |||
| |||
Sampled colour
PICTURE MODE : CINEMA1
POINT1
POINT2
POINT3
POINT4
POINT5
POINT6
POINT7
POINT8
ALL DELETE
Sampled colour
Adjusted colour
2.Select the required log from 1 - 8 or ALL DELETE, and press ENTER.
Select CHANGE to edit the log.
The cursor menu is displayed and you can readjust the colour.
Select DELETE to delete the log.
The confirmation screen will be displayed. Select OK to delete.
When you select ALL DELETE, the "DELETE ALL LOG." screen is displayed. Select OK to delete all logs. The PROFILE setting will be set to NORMAL.
