Technical features
Mains supply | 200 to 240 V ±10% - 50/60 Hz |
Consumed power | 16 W when ON - 4 W in the eco mode |
Clock autonomy | approx. 30 minutes |
Dimensions (W/H/D) | 393 x 94 x 278 mm |
Weight | approx. 4.0 kg |
Functioning conditions | +5°C to +40°C - Surrounding humidity: 80 % maximum |
Tape heads (*) | video: 2 - 4 rotary heads |
| audio: 1 fixed head (mono linear track) |
|
|
Tuner (*) | PLL,VPS/PDC Type |
Reception band | |
| |
| |
Frequency ranges | 45 to 855,25 MHz |
Colour system | PAL - SECAM - MESECAM |
| Playing of an NTSC tape on TV PAL 60Hz |
Reception norms | LL’ - BG - DKK’ |
Number of storable channels | 99 |
Modulator | UHF |
| Channel 21 to 69 - |
| Standards L - G - K |
|
|
Remote control | Infrared 33 Khz - Batteries 2 x 1,5 V (AA) |
Menu language (*) | French - English - German - Italian - Spanish - Dutch |
|
|
Automatic functions | On (using any key) |
| Play (with protected tape) |
| Rewinding (at the end of the tape) |
Tapes | VHS format - Rewinding time: 130s with E 180 |
|
|
Identifying and correcting problems
If you have any problems, check the counter measure for each symptoms listed below. If the problem persists, note your VCR Model Number and Serial Number which can be found on the back of your VCR. Contact your nearest authorized service centre or dealer for assistance.
VCR set cannot be turned on. | 1. Make sure the power cord plug is inserted in an AC power outlet. |
| 2. Ensure the Power On/Off switch is on. |
|
|
Intermittent or no remote operation. | 1.Aim the remote control directly at the VCR. Nothing should be blocking the |
| remote control and the VCR. |
| 2. Use new batteries.The batteries in the remote control may be weak or dead. |
Snowy picture.
Noisy sound.
Dotted lines or stripes Spotted picture (crosstalk.) Lines or streaks in picture (interference).
Double images or“ghosts”.
1.Check your aerial or cable VCR connection.
2.Check the antenna connection on the VCR and on the wall.
1.This may be caused by local interference (e.g. cars, neon signs, hair dryers, personal computer, audio devices, handphone, radio stations, etc.).Try moving the interfering equipment or adjust the aerial antenna.
1.A highly directional antenna may improve the Picture.This may be caused by reflections from nearby mountains or building.
Good picture. | 1. Check the transmission standard selected for the current VCR programme. |
Noisy sound. |
|
|
|
No picture. | 1. Ensure the power On/Off switch is on. |
No. sound. | 2. Check the antenna connection. |
MESECAM | 1. If the pictures are poor, check that the MESECAM function is off. |
|
|
Recording is impossible: | 1. See if the safety tab of the cassette isn’t broken. |
| 2. Check if you have properly performed the steps for the preparation of your |
| recording as set out on page 13. |
|
|
In our efforts to improve the quality of our products, we reserve the right to change their features. The information contained in these instructions are therefore liable to change and are not contractual.
(*): If included | 22 |