Timer operations
A
ÏPLAY/ÏREC
CLOCK/TIMER
@DEMO
B
H SLEEP PROGRAM CANCEL
SLEEP
|
|
| DISC |
1 | 2 | 3 |
|
|
|
| |
4 | 5 | 6 |
|
7 | 8 | 9 | 0 |
3D AI EQ/M.EQ BAND |
|
| |
| EQ |
| |
CH SELECT |
|
| AV EFFECT |
TEST | UPRO LOGIC | SUPER | DIGITAL |
|
| SURROUND | S.WOOFER |
VCR/AUX/ | TAPE/ | CD | TUNER/ |
6CH INPUT | DECK 1/2 | BAND | |
| Ú/g | ÛÈ | Û |
MUTING | M N |
| |
¶ | VOLUME | µ | |
SLEEP
SLEEP
Using the timers
»A The play and record timers
Checking the timers
Press [CLOCK/TIMER,
Play timer:
Start time>Finish time>Source>Volume Record timer:
Start time>Finish time>Broadcast station you select
The timers can be checked even if the unit is off.
Playing the unit after the timers are set
The unit can be used after the timers are set. Make sure the unit is off before the set start time.
Turning the timers on and off
The timers come on at the set times if “FPLAY/FREC” indicator is illuminated. They can be turned on and off by pressing [FPLAY/ FREC] (➡ pages 34 and 35).
Note
³If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated.
³If the power is on, the timer will not function. The system must be in the standby mode.
³This system retains the ON/OFF time settings until you make a new setting. If you make a new ON time setting, you must make a new OFF time setting.
»B The sleep timer
Remote control only
This timer turns the unit off after a set time.
While playing a source
Press [SLEEP] to select the time (minutes).
Each time you press the button:
SLEEP
To cancel the sleep timer
Press [SLEEP] to select “SLEEP OFF”. “SLEEP” goes out.
To confirm the remaining time
(While the timer is functioning) Press [SLEEP].
The remaining time is shown for about 5 seconds.
To change the setting
Press [SLEEP] to display the remaining time, then press again to se- lect the required time.
Using the timers together
Any of the timers can be used together, but ensure the unit is off be- fore the start time for the record and play timers.
RQT5355
