2, 4 3
TUNING MODE SET
A SET
MHz
The radio: preset tuning
There are two methods of presetting stations.
Automatic presetting: The stations the tuner can receive are preset.
Manual presetting: You can select the stations to preset and the order they are preset in.
There are 39 channels available for presetting.
»A Automatic presetting
Do the following once each for FM and AM.
Preparation: Tune to the frequency presetting is to begin at (á page 17).
Hold down [SET].
Release the button when “AUTO MEMORY” appears.
The tuner presets all the stations it can receive into the channels in ascend- ing order. FM stations are preset into channels 1 to 39, and AM stations are preset into channels 21 to 39.
“SET OK” is shown when presetting is complete and the last station to be preset is played.
“ERROR” is displayed if the tuner doesn’t receive any stations. Do preset- ting manually if this happens (see below).
Note
Basic operations
B
2 SET
3? TUNING @
4SET
C
Í
HSLEEP PROGRAM CANCEL
1 | 2 | 3 | DISC |
|
4 | 5 | 6 | 2 | |
7 | 8 | 9 | 0 |
AM stations replace any FM channels that were preset in channels 21 to 39.
»B Manual presetting
Preset the stations one at a time.
1Tune to the required station.
2 Press [SET].
3 Press [TUNING (X or W)] to select a channel. 4 Press [SET].
The station occupying a channel is erased if another station is preset in that channel.
»C Selecting channels
Preparation: Press [ê] to turn the unit on.
On the remote control
1
TEST UPRO LOGIC SUPER SRND
3D AI
| EQ |
|
|
|
|
|
CH SELECT |
|
| AV EFFECT |
| ||
SUPER |
|
| DIGITAL |
| ||
SOUND EQ |
|
| S.WOOFER |
| ||
VCR/AUX/ | TAPE/ | CD | TUNER/ | 1 | ||
6CH INPUT | DECK 1/2 | BAND | ||||
| 2/; | » | ¤ |
|
|
|
|
|
|
| |||
MUTING | 4 |
| 5 |
|
| |
|
|
|
|
|
| 3 |
∂ VOLUME | µ |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 TUNER/BAND
2 1 | 2 | 3 |
|
4 | 5 | 6 | |
|
|
| Preset channel |
7 | 8 | 9 | 0 |
3 | ∂ |
| VOLUME µ |
RQT6301 |
|
|
|
2 Press the numbered buttons to select the channel.
For channels 1 to 9 press the corresponding number.
For channels 10 or over press
3 Adjust the volume.
On the main unit
1Select “PRESET” with [TUNING MODE].
2Press [TUNING (X or W)] to select the channel.