In order to lock a channel you should know the Parental Lock password (default value is set to 0000 in the factory and can only be changed from the Configuration menu).
By pressing “
” or “
” buttons, highlight the channel to be locked and select the “Lock” option by pressing “
” or “
” buttons. Then press the OK button and a password box is displayed:
Setting Favourites
To set a favourite you should highlight the “Favourites” item at the bottom of the Channel List menu. Then press OK button and Edit Favourite List menu appears on the screen.
Note: You can tag/untag a selected channel by using YELLOW button. Use GREEN button to Tag/Untag all channels.
Adding a Channel to a Favourites List
By pressing “
” or “
” buttons, highlight the channel that you want to add to the favourite list. By pressing OK button, the highlighted channel is added to Favourite List. F icon indicates that a channel is added to Favourite List.
Removing a Channel from a Favourite List
•Highlight the channel that you want to remove from the favourite list and press OK button to remove.You can press OK button again to
•To activate Favourites, go to the Configuration menu and select Favourite mode. Use “
” or “
” to set Favourite mode as on. To cancel Favourites, set Favourite Mode to Off.
Program Guide
This section is same with the instructions given in the General Operations page. Please see Electronic Programme Guide (EPG) section in the General Operations part.
English
Common Interface
Press MENU button to display the main menu and use the “
” or “
” buttons to highlight the “Common Interface” line and press OK button.
It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial broadcasting.
Obtain the Conditional Access Module (CAM) and the viewing card by subscribing to a pay channel company, then insert those to the Television using the following procedure.
•Switch off the TV and unplug from the mains.
•Insert the CAM, and then the viewing card to the slot.
•The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.
•Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated.
•Some CAMs may require the following set up. Please set the CAM by entering the DIGITAL TV menu, Common Interface then pressing OK button. (CAM set up menu is not displayed when it is not required.)
•To see the viewing contract information:
•Enter DIGITAL TV; press MENU button, then highlight Common Interface and press OK button.
•When no module is inserted, “No Common Interface module detected” message appears on the screen.
•Refer to the module instruction manual for details of the settings.
NOTE: Insert or remove the CI module only when the TV is in STANDBY mode or SWITCHED OFF.
TV Setup
You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed from the main menu. Press the MENU button to display the main menu and use or buttons to highlight “TV Setup”. Press OK button to display TV Setup menu screen.
You can find detailed information for all menu items in “Analogue TV Menu System” section.
- 18 -
17.06.2010 13:10:09 |
