Technika 42-2030 operating instructions IP Settings, Automatic Channel Scan

Models: 42-2030

1 37
Download 37 pages 43.16 Kb
Page 23
Image 23

.

You can set the desired language options by using “” /“

” and “”/“” buttons.

IP Settings

You can configure your TV’s IP settings by using this menu screen. Press YELLOW button to set static IP settings. Use BLUE button to configure dynamic IP settings. You can press RED button to disable IP configuration.

In order for the Ethernet host to work correctly with your Internet connection it needs to have a unique IP address. In most cases all of the parameters can be provided by the DHCP server in their router. In this case you should use the “Dynamic” option.

In the unlikely event that you dou not have a DHCP server in your router or if you prefer to assign your own IP address, then the “Static” option can be used. You will need to enter a unique IP address along with the default gateway and DNS server. In most domestic networks the default gateway and DNS server will both be the IP address of the router.

Installation

The Installation menu is mainly intended to help you for creating a Channel Table in most efficient way. Select Installation from the main menu by pressing “ ” or “” buttons.

Automatic Channel Scan

Automatic channel scan is started by pressing OK button while Automatic channel scan item is highlighted.

The following message appears on the screen:

Highlight Yes or No by using “” or “” buttons and press OK button to confirm.

If Yes is selected, automatic search starts.

Selecting No cancels automatic search.

After search is completed for digital channels, a message asking whether to search for analogue channels appears on the screen:

Highlight Yes and press OK button to search for analogue channels. The following menu appears on the screen for analogue channel search:

Set Language item by pressing “” or “” button. Press “” or “” button to highlight Country item and then use “” or “” to set. Press “” or “” button to highlight TXT Language. Select a region by using “” or “” button. When finished, press OK or RED button to continue. To cancel, press the BLUE button.

After APS is finalized, the programme table will appear on the screen. In the programme table you will see

English - 21 -

A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 21

17.06.2010 13:10:10

Page 23
Image 23
Technika 42-2030 operating instructions IP Settings, Automatic Channel Scan