TechniSat DigiPal 2 manual Exiting from the installation assistant

(Fig. 5-6)

(Fig. 5-7)

(Fig. 5-8)

>Press the OK key now to confirm, and an automatic programme scan will be carried out. The entire recep-

tion range of the receiver will be scanned for digital programmes This procedure may take several minu- tes. Please note any messages displayed on the screen (Fig. 5-6).

Updating the software

When the programme scan has been completed, the digital receiver will check whether a new version of the software is available for your unit. If a new version is available, you can perform an automatic software update.

>Use the arrow keys left/right to select the field Update, and confirm by pressing OK. (Fig. 5-7)The new software for the receiver will now be downloaded. This procedure may take several minutes.

Exiting from the installation assistant

>Read the message displayed (Fig. 5-8)and confirm by pressing OK, to return to normal operation.

14