TechniSat DigiPal 2 manual Manual Scan, After the scan

8.4.3 Manual Scan

Should a programme not be found by either the automatic scan or the expanded scan, you can scan a specific channel for available programmes, or you may use PID data to search for a specific programme.These numbers may have to be found in the Internet, or obtained from the relevant pro- gramme provider.

>To scan a particular channel (Fig. 8-16), use the arrow keys left/right to enter the desired channel.

>Press the red function key Start Scan to initiate the scan.

PID scan

>Enter the channel on which the desired programme is broadcast as described above.

>Use the green function key PID scan to enter the PCR, Audio and Video PID. (Fig. 8-17)

>Now use the arrow keys up/down to mark the lines PCR PID, Audio PID and Video PID and use the numeric keys to enter the appropriate values.

8.4.4 After the scan

You can follow the progress of the programme scan on screen while it is still in progress. When the scan is comple- ted, the total number of programmes found as well as the number of new programmes found will be indicated. In addi- tion, a prompt will be displayed, asking you whether you wish to save the programmes found automatically in the TV or Radio list. If you wish to accept the programme list automati- cally, you can then decide whether the programmes should be added to the Favourites list in sorted or unsorted formn.

Sorted

The programmes found will be sorted into the Favourites list in accordance with a pre-programmed list. The order in which programmes are listed will depend on the audio language selected in Point 6.3.2 resp. the country selected in Point 6.2.2.

Unsorted

The newly found programmes will be added to the end of the Favourites list in unsorted form.

No

The newly found programmes will not be added to the Favourites list, and will only be added to the Total list.

>Use the arrow keys left/right to indicate whether you wish to accept the programmes in sorted or unsorted form.

(Fig. 8-16)

(Fig. 8-17)

43