Your receiver will now check whether SFI data is being received on the channel selected. This infroma- tion will be displayed along the bottom of the window.
Update time
>In the line Update time use the numeric keys to set the time at which you wish the automatic downlo- ad of SFI data to be performed.
Updating
>To download the data of the data channel, mark the line SFI Updating.
>Switch the function on by pressing OK .
If you do not wish to receive the additional data, or if you are unable to receive the data because of your location, the data reception function can also be switched off:
>Set the SFI Updating function to off, to switch off the data reception. Only the programme information provided by programme providers will then by availa- ble.
Starting download procedure manually
>To start the updating of SFI data manually, press the red function key Start now.
8.3 Parental control(blocking programmes)
Your unit is equipped with a parental control function. This means that important functions (e.g. calling up the manin menu) can be protected from unauthorised manipulation. In addition, programmes and recordings that you have specifi- cally blocked can only be accessed after entering a
To work with the Parental Control menu proceed as fol- lows:
>
(Fig.
> Use the arrow keys up/down to mark the line Settings.
> Confirm by pressing OK.
The
> Use the arrow keys up/down to mark the line Parental Control.
> Confirm by pressing OK.
The menu Parental Control will be displayed. (Fig.
> Use the arrow keys up/down to move the marker withing the menu, and to change the individual posi- tions as indicated. When selecting a menu item, plea- se also note any messages displayed on the screen.
8.3.1 Changing the receiver PIN code
The receiver PIN code is set at the factory to 0000.
To change the receiver PIN code proceed as follows:
39
