TechniSat DIGITY 1 manual Switch DiSEqC on or off

bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 13

type of LNB, then you must adjust the receiver as follows :

>Press the Menu, key in order to display the Main menu.

>Use the arrow up/down keys to mark the line Settings.

>Confirm by pressing OK.

The menu Settings will be displayed.

>Now mark the line LNB Settings by means of the arrow up/down keys.

>Confirm by pressing OK.

The menu LNB Settings will be displayed.

The following adjustments can be made in this sub-menu:

5.4.1 Switch DiSEqC on or off

DiSEqC (Digital Satellite Equipment Control) is a digital control signal used to control and switch DiSEqC-compatible components via the antenna cable.

If your external unit is equipped with DiSEqC components, you must switch on the DiSEqC- control:

13