TechniSat MultyFocus operating instructions Outdoor unit, Normal

*M-Focus 2.6.95 14.12.1999 10:33 Uhr Seite 10

5.3 Outdoor unit

Both LNB inputs can be configured to use separate outdoor units.

Example: CombySat LNB set-up to accommodate the entire Ku band (between 10.7 and 12.75 GHz). (This LNBis also pre-configured)

> Display the installation menu (see p. 8).

>	Press	to set pointer to „Autofocus“.
>	Press	to select „on“.

If you activate the auto-focus feature, the receiver detects the best antenna position upon each change of satellites.

You can also customise the receiver’s LNBs to different LOFs.

>	Press		to set pointer to „Ausseneinheit“ (outdoor unit).
		OK		Outdoor unit 1
				band	Ku
				> LNB typ	CombySat
				auto-focus	on
				polarizer	ferrite
				LOF	normal
				upper LOF	10750 MHz
				lower LOF	9750 MHz
				^/v/</>/0-9/MENU/OK/STOP
pointer to „LNB-Typ“
>	Press		to select „CombySat“.

>	Press	.
>	Press	to set
	pointer	to „Band“
	(band).
>	Press	to select
OK	Ku band.

If you select C band, the receiver automatically uses inverted video polarity.

> Press to set

OK

>	Press	to set pointer to „LOF“.
>	Press	to switch to „Andere“ (other)
>	Press	to set pointer to „Obere LOF“ (upper LOF).
>	Press	or use the ten-key keypad to select LOF.
>	Press	.

The selected values are stored and the same menu is displayed to set up the second LNB input.

>Select the values accordingly for the second LNB input.

> Press to store.

>The receiver automatically returns to the installation menu.

The receiver loads all the related local oscillator frequencies (LOFs) automatically.

> Press to set pointer to „Polarizer“.

>Press to toggle between „ferrite“ and „mechanical“. This setting depends on the polarizer type you are using.

10