TechniSat MultyFocus operating instructions Focus 2.6.95 14.12.1999 1037 Uhr Seite

*M-Focus 2.6.95 14.12.1999 10:37 Uhr Seite 27

Video settings
brightness	3
> polarity	Normal
decoder	Int
decoder signal	D4
^/v/</>/MENU/OK/STOP

>

>

„Normal“.

>

press to set pointer to „polarity“.

press to select

press OK to store the parameters selected in this menu and to turn to the menu „Audioeinstellungen“ (audio settings).

>press to set pointer to „Freq. left“.

>press to select „7.02 MHz“.

As the „Voreinstellungen“ (pre-adjustments) function has been turned On, the audio frequency of the right channel automatically changes to 7.20 MHz. Turn off the „Voreinstellung“ (pre-adjustment) setting to select separate frequencies and smaller increments on both audio channels.

>press OK to store the parameters selected in this menu and to return to the menu „Neue Programme und Satelliten“.

Press to select the next menu without memorising the settings.

STOP

Audio settings
> audio bandwidth	130 kHz

STOP

Press to select the next menu without memorising the settings.

>press to set pointer to „Programm“ (channel).

deemphasis	TMSP
basic volume	6
pre-adjustments	An
mode	Stereo
freq. left	7.02 MHz
freq. right	7.20 MHz

^/v/</>/0-9/MENU/OK/STOP

>press to select „TMSP“.

>press to set pointer to „basic volume“.

>press to select 6.

>press to set pointer to „mode“

>press to select „Stereo“.

> INDEX

>

> STOP

press to set pointer to „audio bandwidth“.

press to select „130 kHz“.

press to set

pointerto „Deemphase“

>	press	.
>	press	to select a new name and press OK to store.

>press OK to store and to return to the channel menu.

> press to revert to normal operation.

The new name appears once you have changed channels.

27