TechniSat MultyFocus operating instructions Specifications, Scart TV, Scart VCR, Scart Decoder

*M-Focus 2.6.95 14.12.1999 10:39 Uhr Seite 46

11 Specifications
Tuner
Input frequency	950 - 2050 MHz
Input resistance	75 Ω
Input level	47 - 77 dbuV
Connector	F female, 2 pieces
LNB control
DC	18 V ± 0.5 V max. 400 mA1)
	13.5 V ± 0.5 V, max. 400 mA1)
AC	22 kHz, 0.5 Vp-p
Bandwidth	27/36 MHz
Tuning	PLL frequency synthesis
TV connection
Output	SCART TV
Video
Deemphasis	CCIR Rec. 405-1; 625 lines
Bandwidth	5 MHz (3 dB)
Output level	1 Vp-p at 75 W, adjustable to 4 levels 1)
Audio
Frequency range DF	5.4 - 8.7 MHz, adjustable collectively or separately with 180 kHz or 10 kHz increments 1)
Bandwidths	130, 180, 200, and 380 kHz 1)
Deemphases	50 µs, 75 µs, J17, Panda11)
Frequency range NF	100 Hz ... 14 kHz
Output level	1.7 Vp-p at nominal peak; 1 kHz adjustable to 6 levels 1)
Distortion	typ. 0.5 %, max. 1 % at 1.5 Vp-p, 1 kHz
VCR connection
Output	SCART VCR
Video	see above
Audio	see above
Input signal	FBAS, 2 Vp-p ± 2 dB at 1 kΩ
Video

Audio	2 V p-p
Decoder connection
Output	SCART DECODER
Video	adjustable to four modes 1)
	Baseband, 1 Vp-p with 75 Ω at 1.5 MHz
	Baseband with deemphasis
	Baseband with deemphasis and filter with deemphasis, filter and clamping FBAS signal
Audio	see above
Input signal	FBAS 2 Vp-p ± 2 dB at 1 kΩ
Video
Audio	2 Vp-p
HF modulator
UHF range	channel 21 to 45 selectable, preset to channel 39
Standard	G
Output level	74 ± 4 dBuV
Output	IEC male
Input	IEC female
Output resistance	75 Ω
Motor
Permanent power	max. 1.3 A
Polarizer
Ferrite
Output power	± 60 mA
Mechanical
5 V supply	max. 200 mA
Pulse width	0.8 ms - 2.2 ms
Pulse break	15 ms
Power supply
Supply voltage	185 V - 265 V, 50 Hz
Power requirements	max. 70 W

(with 2 LNBs and with running motor) General data

46