5.9 External Programmation
You can copy programmation changes to a second receiver.
The data transfer between both receivers requires an authentic SCART cord (21 pins).
>Connect the SCART 3 output of receiver 1 with the SCART 3 input of receiver 2.
On both receivers:
>display the installation menu (see p. 8).
>press 
to set pointer to „ext. programmation“
>press OK .
On target receiver to be
>press 
to set pointer to „Ziel“ (target)
>press OK to begin.
On source receiver to copy programmation from:
>press 
to set pointer to „Quelle“ (source)
>press OK to begin.
During the data transfer the screen displays a number between 1 and 127.
On the receiver with the new programmation data:
>press 
on the receiver.
On both receivers:
> press STOP to return tothe installation menu.
16
