6 Operation

6.1 Switching on and off

Preferably use the power-on switch to turn the receiver on and off.This saves power and the environment.
For brief operational breaks use the remote control function:
> Press to turn on and to switch to standby mode.

6.2 Selecting a channel

a) Using the ten-key keypad
Channel position 123
Channel position 3
(wait 2 sec) Channel position 1
b) Press on the remote control
or on the receiver
c) Using channel lists
> press twice for TV channels,or three times for radio channels
> press to set pointer to desired channel.
> press or
> press to return to the channel previously selected.
The receiver only displays the channels of all stored satellites.
Deleted channels (see 7.3) Are not displayed.

6.3 Selecting a satellite

a) By selecting a related channel,e.g.:
> Reflector peaks ASTRA and selects channel position 3.
b) Using the satellite list
> press once.
> press to set pointer to the desired satellite.
> press or
> press to return to the channel selected previously.
The receiver only displays the channels of all stored satellites.

6.4 Volume control

> press to turn down,or to turn up
> press to turn off completely.
OK
OK
Netz
18
INDEX
INDEX
STOP
STOP

1 2 3

0 0 3
0 0 3

1

PROGR
*M-Focus 2.6.95 14.12.1999 10:36 Uhr Seite 18