ACCESSORIES USED
Citrus press unit (g).
ASSEMBLING THE ACCESSORIES
-Slide the drive unit (g4) onto the motor unit outlet (a1).
-Place the juice receptacle (g3) on the motor unit (a).
-Lower the filter (g2) around the receptacle.
-Put the cone (g1) on the receptacle chimney (g3), then turn the assembly to the right to the stop.
-To remove the citrus press unit: turn the assembly toward yourself to release it.
-Place any sort of recipient under the juice collector (g3) to collect the pressed juice.
-Cut the fruit in half and position on the cone (g1).
-Turn the speed selector (a2) to the 1 position to start.
-You can squeeze up to 500ml of citrus fruit without emptying the filter ring (g2).
9. Extract fruit and vegetable juice(depending on the model)
ACCESSORIES USED
-Bowl (b3).
-Juicer unit (i).
ASSEMBLING THE ACCESSORIES
-Place the bowl (b3) on the motor unit (a) without locking it.
-Assemble the filter basket (i4) with its filter ring (i3): lower it into the filter basket to clip it on so that the assembly holds together.
-Slide the assembled filter basket (i3+i4) onto the motor unit outlet (a1).
-Put on the lid (i2) and lock it on the bowl (b3), then turn the assembly to the right to the stop.
-To remove the
-To remove the filter basket assembly (i3+i4), press on the 2 clips of the filter ring (i3) to release the filter basket (i4).
USAGE AND PRACTICAL TIPS
-Remove hard stones, thick peel (such as melon and kiwi) and hard cores from fruit before processing.
-Turn the speed selector (a2) to the 2 position to start.
-Insert the food cut into pieces through the feed tube and push down slowly with the pusher (i1).
-Empty the waste in the filter basket frequently (i3+i4).
-Do not juice more than 250 g of ingredients (apples, carrots, etc.) at a time
20