1800128430_01 _GV5010E0_110x154 30/11/12 11:54 Page10

For your safety, this appliance conforms to all applicable regulations (Low Voltage Directive, Electroma- gnetic Compatibility, Environment, etc).

Your steam generator iron is an electrical appliance: it must be used under normal conditions of use. It is designed for domestic use only.

It is equipped with 2 safety systems:

-a pressure release valve designed to avoid excessive pressure. In the event of malfunction, the valve releases excess steam.

-a thermal fuse to avoid overheating.

Always plug your steam generator iron:

-into a mains circuit with voltage between 220 V and 240 V,

-into an earthed electrical socket.

Connecting to the wrong voltage may cause irreparable damage to the appliance and will invalidate your guarantee.

If you are using a mains extension lead, ensure that it is correctly rated (16A) with an earth, and is fully extended

Completely unwind the power cord before plugging into an earthed socket.

Check the electrical power and steam cords for signs of wear or damage prior to use. If the electrical power cord or the steam cord is damaged, it must be replaced at an Approved Service Centre to avoid any dan- ger.

The sole plate of your iron and the iron rest on the base unit can reach extremely high temperatures, and can cause burns: do not touch them. Never touch the electrical power cords with the sole plate of the iron.

• Always use a vented/mesh ironing board and be careful of hot steam when ironing close to the edges of the board.

Your appliance emits steam, which can cause burns. Always handle the iron with care, especially when iro- ning vertically. Never direct the steam towards people or animals.

Never immerse your steam generator iron in water or any other liquid. Never place it under a running tap.

PLEASE RETAIN THIS INSTRUCTION BOOKLETFOR FUTURE REFERENCE

10