ENG

ENVIRONMENT PROTECTION FIRST !

Your appliance contains valuable materials which can be recovered or recycled. ⇐Take it to a local civic waste collection point.

12- IS THERE ANY PROBLEM

Problems

Possible causes

Solutions

•Water runs through the holes in the sole plate.

• The boiler is too full.

•

Do not fill the boiler right up to the top.

• The thermostat is not working :the temperature

•

Contact anApproved Service Centre.

is always too low.

 

 

 

 

• You are using the steam control button before

• Wait for the iron’s thermostat light to come on

 

 

 

the iron is hot enough.

and go off again before activating the steam

 

 

 

 

control button.

 

 

 

• Water has condensed in the pipes because you

• Press the steam control button away from your

 

 

 

are using steam for the first time or you have

ironing board until the iron produces steam.

 

 

 

not used it for some time.

 

 

 

 

 

 

 

• White steaks come through the holes

• Your boiler has a build-up of scale because it is

• Rinse the boiler every 10 uses (see chapter 9).

 

 

in the soleplate.

not rinsed out regularly.

If your water is hard,increase the frequency.

 

 

 

 

 

 

• Brown streaks come through the

• You are using chemical descaling agents or

• Never add this type of product in the boiler (see

 

 

holes in the soleplate and stain the

additives in the water for ironing.

our recommendation regarding water to be used).

 

 

linen.

• Your linen is not rinsed sufficiently or you have

• Ensure linen is rinsed thoroughly to remove any

 

 

 

 

 

 

ironed a new garment before washing it.

soap deposits or chemical on new garments which

 

 

 

 

have been sucked up by the iron.

 

 

 

 

 

 

• The soleplate is dirty or brown and

• You are ironing at too high a temperature.

• See our recommendations regarding temperature

 

 

may stain the linen.

 

control setting.

 

 

 

• You are using starch.

• Always spray starch on the reverse side of the

 

 

 

 

fabric to be ironed.

 

 

 

 

 

 

• There is no steam.

• The boiler is empty.

• Fill the boiler.

 

 

 

• The boiler is not yet ready.

• After switching on,wait for the steam thermostat

 

 

 

 

light to go out (about 4 minutes).

 

 

 

 

 

 

• Steam escapes from the boiler cap.

• Cap screwed on incorrectly.

• Screw the cap back on.

 

 

 

• The seal on the cap is damaged.

• Change the cap seal (spare seals supplied with the

 

 

 

 

steam generator in the box).

 

 

 

 

 

• Steam escapes under the appliance.

• The equipment is faulty.

• Stop using the generator and contact anApproved

 

 

 

 

Service Centre.

 

Never dismantle your iron :always take it to an Approved Service Centre.

HELPLINE

If you have any product problems or queries with your product, please telephone our Customer Relations team on :

0845 602 1454 (UK) (Calls charged at local rate) - (01) 4751947 (Ireland) Consult our web site : www.tefal.co.uk

Page 29 Page 31
Page 30
Image 30
Tefal GV6600G8, GV6600G0, GV6600J0, GV6600K0 Environment Protection First, Is There ANY Problem, Problems Possible causes
Page 29 Page 31

GV6600S0, GV6600G0, GV6600E0, GV6600C0, GV6600G8 specifications

The Tefal GV6600 series is a collection of powerful steam generators designed to make ironing more efficient and convenient. The models GV6600E5, GV6600J0, GV6600C5, GV6600G8, and GV6600C0 each carry a blend of innovative technologies and user-friendly features aimed at delivering exceptional performance.

One of the standout features across these models is their powerful steam output. With a high-pressure steam boost, users can easily tackle stubborn wrinkles in a variety of fabrics. The continuous steam output is also significant, allowing for consistent, effective ironing without constant refills. Depending on the model, users can expect a steam output ranging from 120 to 180 grams per minute, ensuring that even thick fabrics are easily smoothed out.

The GV6600 series models are equipped with Tefal's advanced technology - the Ultra Glide soleplate, which provides a smooth glide over fabrics. This soleplate is not only durable but also scratch-resistant, ensuring it maintains high performance over time. The non-stick surface allows for easy cleaning and can glide effortlessly over all types of fabric.

Another great feature is the integrated descaling system. This system significantly reduces limescale build-up, extending the life of the steam generator and ensuring optimal performance. Some models even offer a removable water tank that allows for easy refills while ironing.

In terms of user convenience, many models in this series come with an ergonomic handle that provides comfort during prolonged ironing sessions. Additionally, the generous water tank capacity means less interruption during ironing sessions, providing up to 1.7 liters of water.

Safety features are also prioritized in the GV6600 range. Automatic shut-off ensures that the device turns off when left unattended for a certain period, guaranteeing peace of mind for users.

Overall, the Tefal GV6600E5, GV6600J0, GV6600C5, GV6600G8, and GV6600C0 steam generators answer the needs of modern users with their powerful steam performance, advanced iron technologies, user-friendly features, and safety measures, making garment care more manageable and efficient.
Top Page Image Contents