RICE COOKER MICROCOMPUTER_NC00112493_NC00021289 24/04/12 07:33 Page12

The colour of the bowl surface may change after using for the first time or after longer use. This change in colour is due to the action of steam and water and does not have any effect on the use of the Rice Cooker, nor is it dangerous for your health. It is perfectly safe to continue using it.

Cleaning and care of the other parts of the appliance

Unplug the appliance before cleaning.

Clean the outside of the Rice Cooker, the inside of the lid – Fig.24and the cord with a damp cloth and wipe dry. Do not use abrasive products.

Do not use water to clean the interior of the appliance body as it could damage the heat sensor.

Technical troubleshooting guide

Malfunction description

Causes

Solution

 

 

 

Any indicator lamp off and no

Rice cooker not plugged.

Verify the main plug is well

heating.

engaged in the product body.

 

 

 

 

Any Indicator lamp off and

Problem of The connection of

Send to authorized service

the indicator lamp or Indicator

heating.

center for repair.

lamp is damaged.

 

 

 

 

 

Cooking Indicator lamp off,

Cook button is not in cooking

Put the cook button in low

keep warm indicator on.

position.

position (cooking).

 

 

 

 

Lid is badly closed.

Open and close again the lid.

 

 

 

 

 

Stop the cooking (unplug the

Steam leakage during using.

Micropressure valve not well

product) and check the valve is

positioned or uncomplete.

complete (2 parts locked

 

 

together) and well positioned.

 

 

 

 

Lid or micropressure valve

Send to authorized service

 

gasket is damaged.

center for repair.

 

 

 

Rice half cooked or overtime

Too much or not enough water

Refer to IFU for water quantity.

cooking.

compared to rice quantity.

 

 

 

 

Rice half cooked or overtime

Not sufficiently simmered.

Simmer as required in IFU

cooking.

cooking paragraph.

 

 

 

 

Automatic warm-keeping fails

 

Send to authorized service

(product stay in cooking

 

 

center for repair.

position, or no heating).

 

 

 

 

 

 

Water leakage on the table.

Dew collector missing or dew

Empty the dew collector for each

use verify good positionning of

collector overflow.

 

the dew collector.

 

 

 

 

 

Remark : if inner bowl is deformed, do not use it anymore and get a replacement bowl from the authorized service center for repair.

12