TefDis-VB Numer 03-11 28/03/11 15:30 Page 39

OperationSwitching on the appliance

To switch on the appliance, press the button 4A and 4B ON/OFF on the baby unit and the parents' unit for 2 to 3 seconds – fig. E

The ON indicators 5A and 5B will light up green on the baby unit and the parents' unit – fig. F

The connection indicators 6A and 6B will light up green on the baby unit and the parents' unit: the connection is working – fig. F

If the connection between the baby unit and the parents' unit is broken (out of range, or if the baby unit or the parents' unit is switched off), the connection indicator turns red. On the parents' unit, you will also hear a beep (every 30 seconds) to warn you that the connection has been broken.

It is important that you always position the parents' unit at least 1 metre from the baby unit. When they are too close to one another, you will hear a high pitched noise.

Baby unit

Night light function

To switch on the night light, press the button 1A. To deactivate it, press the button 1A once again.

Parents' unit

Setting the volume

You can set the volume of the parents' unit using the + and – buttons 2B. There are 6 different settings, the lowest level switches off the sound and just uses the visual indication.

Setting the sensitivity of the microphone

The noises made by Baby may be of different levels, depending on whether crying or murmuring in the cot. The sensitivity of the microphone allows the sound level to be adjusted as required: the slightest noise or only if Baby is fully awake.

Press the button 7B (sensor) – fig. G – until the indicator number 4 lights up – fig. H

– then adjust the sensitivity by pressing the + or – buttons 2B within 3 seconds – fig. I. Confirm by pressing the button 7B again (sensor).

There are 5 sensitivity settings, from 1 for the lowest sensitivity to 5 for the highest setting. T default setting is level 3.

Walkie-talkie function

To reassure Baby when he/she awakes, without having to go to the room, you can use the walkie-talkie function.

Press the button 1B when you speak – fig. J, then release it to listen to Baby again.

Noise intensity indicators

The noise intensity indicators 3B are green and red LEDs on the receiver which light up according to the level of noise emitted by the transmitter. There are 8 noise levels, from the lowest to the highest:

–Level 0: 0 green light, no sound emitted

–level 1: 1 green light lit

FR NL DE IT ES PT EN EL TR RU UK PL CS SK HU BG RO HR KZ

39