Teka CG.1 3G. 1P CG Lux-60 4G., CG Lux-60 4G. Al AL Electric Hotplates Maintenance Mod. CG.1 3G P

Electric Hotplates	Maintenance
(Mod. CG.1 3G. 1P.)

Before cleaning, disconnect the appliance from the mains supply.

Electric hotplates should be cleaned with soapy water and a non-abrasive scourer. If, after cooking, the stainless steel ring of the hotplate or cooker frame is seem to be slightly yellow, this may be cleaned using lemon, vine- gar, diluted bleach or any cleaning product which contains bleach.

Do not clean the hotplates when they are still hot.

If any liquid is spilt on the hotplates this should be removed instantly with a dry cloth. Never allow remains of food to carbonize on the hotplate as this will reduce its heat trans- mission capacity.

After using the hotplate it must be greased,N.B. lea- ving its surface shiny and preventing rusting.

No part of this appliance requires pe cation, though the gas tap cones s kept clean and well greased.

Each time the gas taps are disman washer which connects them with the tion pipe should be replaced.

The burners are operating correctly w flame is stable and of a blue-green the points of the flame are yellow the should be well cleaned. If the prob sists, contact your Technical Service.

To guarantee the airtightness of the g llation and the correct operation of ners, the hob must be serviced by th lized Technical Service at least on four years.

Any required modification or setting of the

To extend the lifetime of the hotplate,applianceexcessi-must be carried out by authorized ve humidity or temperature should betechnicalavoidedpersonnel.

where possible.

Steam appliances must not be used to clean the heating plate.

32