Tektronix 780 setup guide Getting Set Up, At a glance

Getting Set Up

At a glance

		Page
1.	What you get with your printer	2
2.	Select a location for the printer.	4

■Optional: Set the printer on the Lower Tray Assembly.

3.	Set up the printer:	6
	■ Load the toner cartridges.	7
	■ Install the imaging unit.	12
	■ Install the fuser roll cartridge.	15
	■ Attach the extensions for the multi-purpose tray.	19
4.	Plug in and turn on the printer.	23
5.	Set the front panel language.	25
6.	Load paper and make a test print from the front panel.	26
7.	Connect the printer:	32

■To a PC:

■	Connect the printer to your computer.	33
■	Connect optional peripherals (scanner, hard disk).	34

■To a network:

■ Connect optional peripherals (scanner, hard disk). 34

■Go to the PhaserShare Networking Setup Guide.

8.	Install printer software.	35
9.	Register your printer.	42
10.	Where to go from here	43
	Setup Guide	1