Teledyne 3300PA

1-4

1 Introduction Model 3300PA

Teledyne Analytical Instruments

•Power Connection 100–240 V ac, at 50/60 Hz. The connector

housing includes the fuse holder and the

power switch.

Fuse Holder: Replacing the fuse is

described in Chapter 5, Maintenance.

I/O Power Switch: Turns the instrument

power ON (1) or OFF (0).

•Analog Outputs 0–10 V dc concentration output.

0–10 V dc range ID (or optional overrange)

output.

4–20 mA dc concentration output, negative

ground.

•Alarm Connections Alarm 1, Alarm 2, and Sensor Failure Alarm

connections.

•Sensor Connector Internal Sampling System, Sensor

Connector.

Contents

Main i Teledyne Analytical Instruments OPERATING INSTRUCTIONS FOR Model 3300PA Percent Oxygen Analyzer DANGER P/N M69127 08/06/99 ECO # 99-0323 ii Copyright 1999 Teledyne Analytical Instruments Contents Page COMBUSTIBLE GAS USAGE WARNING DANGER Page Introduction 1.1 Overview 1.2 Main Features of the Analyzer 1.3 Front Panel Description 1.4 Rear Panel Description Page Operational Theory 2.1 Introduction 2.2 Micro-Fuel Cell Sensor Page Page Page 2.3 Electronics Page 3.1 Unpacking the Analyzer Installation 3.2 Location and Mounting 3.3 Electrical Connections Page 3.4 Gas Connections Page 3.5 Installation Checklist Operation 4.1 Introduction 4.2 Using the Function and Data Entry Buttons SET ALARM 1 SET ALARM 2 SET HI RANGE SET LO RANGE SPAN 4.3 Setting the Analysis Ranges 4.4 Setting the Alarm Setpoints Page 4.5 Selecting a Fixed Range or Autoranging 4.6 Calibration Supplementary Information Maintenance 5.1 Replacing the Fuse 5.2 Sensor Installation or Replacement Page Page Appendix A.1 Specifications A.2 Spare Parts List Analytical Instruments