Teledyne C-2000 F. Baud Rate and Link Selection Dialing Prexes

F. Baud Rate and Link Selection Dialing Preﬁxes

The following dialing preﬁx capabilities have been added as part

of software version 4.0A to facilitate the conﬁguration of a speciﬁc

data/voice call. These preﬁxes will override any conﬁgurations/factory

default values which were previously programmed.

F1. Baud Rate Selection Dialing Preﬁxes for Individual

Modem Calls

#4# Sets baud rate for call at 4800 bps

#9# Sets baud rate for call at 9600 bps (if both channels

are available)

NOTE:These preﬁxes override the station default baud rate (See Section VI, B20)

F2. Link Selection Dialing Preﬁxes for Individual Calls

#61# Selects Air-Ground (disables Auto Link Switch)

#62# Selects GroundCell (disables Auto Link Switch)

#63# Selects SATCOM (disables Auto Link Switch)

#612# Selects Air-Ground then GroundCell (SATCOM not included

in the rotation). Used with Genesys Airshow.

NOTE 1:These preﬁxes override the station default link (see Section VI, D1).

NOTE 2:Both Baud Rate and Link Selection preﬁxes can be utilized for the same

call (order sequence does not matter)

NOTE 3:The Link Selection preﬁxes can be used for all call types (i.e. Voice,Fax,

Modem and TDD).

(Rev.8/04)