The user deactivates this feature by using any of the following options:
Option #1: Take the handset off-hook and press:“9”(Setup) -“6”(Call
Fwd) - “Destination Inplane Number”(which is highlighted on menu).
Option #2: Take the handset off-hook and press:“9”(Setup) - “6”
(Call Fwd) - “Current Inplane Number”(i.e. forward back to self).
Option #3: Call Forwarding is automatically cleared from memory
when the ARTU unit is powered down.
E. Facsimile Calls (Using PC or Fax)If you wish to have your fax machine or PC/Modem dial telephone
numbers, you must make certain that your equipment dials using
tones (DTMF) and the RJ-11 cord must be connected prior to
initiating a call.
It is highly recommended that a 4-prong RJ-11 cord be used for
fax and modem connections. Some fax/modem equipment uses
additional signaling that can be utilized by the C-2000 system to
provide enhanced performance. The 4-prong connector enables
access to that signaling.
The MagnaStar C-2000 and the Airfone system provide connections
for Group 3 facsimile equipment. Please note that not all manufactur-
ers comply with Group 3 equipment specifications.
In order to optimize fax performance when sending or receiving a fax:
• Both the airborne and ground fax equipment should have Error
Correction Mode (ECM) enabled, if supported by the particular
models being used.
• Limiting the number of pages sent at any one time will help ensure
complete transmission without interruption.
20
(Rev.8/04)
®