Teledyne C-2000

(Rev.8/04)

C5. Aircraft Credit Card Number Option

The air traveler has the option to store and use one credit card number

for the entire ﬂight and does not require the re-entry of the card

number for each call. The system must ﬁrst be conﬁgured for credit

mode (see Section VI,B3). The software default value is direct billing

mode.

With Direct Billing disabled for the aircraft,this feature allows a user

to swipe a card which causes all calls made from any location on the

aircraft (except the handset(s) conﬁgured as a Cockpit Station) to be

billed to this credit card account. Calls made from Cockpit Station(s)

will be billed to the aircraft account.

The user activates this feature by taking the handset off-hook and

pressing “9”(Setup) - “8”(Credit) - “1”(Enter Aircraft Credit Card

Number), and then sliding the credit card through the handset card

reader slot. Your call will be routed to an Airfone Operator.

The user can manually clear the stored credit card number by taking

the handset off-hook and pressing “9”(Setup) - “8”(Credit) - “2”

(Clear Aircraft Credit Card Number). The credit card number is

also erased once power is removed from the ARTU for more than

30 seconds. To enable this feature follow these directions.

NOTE 1: All direct dialed calls made on the “Cockpit” Station handset(s) will

be billed to the aircraft account number regardless of the system call

billing mode.

NOTE 2: The C-2000 system accepts all major credit cards.

NOTE 3: The Aircraft Credit Card Number Options bills all calls (except those

calls from handsets conﬁgures as “Cockpit”) to the entered credit card.

C6. Placing a Call On Hold

A call may be placed on hold at any time by pressing “+”(Put Call

on Hold). The party on hold will hear silence. To return to the call,

press “#”(Go Back).