Teledyne SERIES 4030, HEATED THC manual Default Parameters, Style Conventions

Operation

4.4.1 Default Parameters

The versatility of this analyzer usually results in significant changes being made to parameters over the course of time to better suit a particular application. Occasionally processes change requiring alteration to alarms, ranges etc. At some time, it may be beneficial to reset the analyzer to the default conditions as it was when shipped from the factory. Below is a listing of the default parameters used in configuring your instrument:

Range/Application: Refer to the data sheet on the first page of this manual

Range: Auto

Alarms: Enabled, AL1=20ppm, AL2=50ppm, HI,

NON-FAILSAFE, NON-LATCHING,

THC levels

Auto Span Timing: Not available.

THC Span: 8 ppm methane in air.

Password: TAI

Analog Outputs: Ch1=THC levels

Ch2=Range ID

4.4.2 Style Conventions

The following typeface conventions are used when referring to screen names, key presses and screen readout:

Screens:	Arial 12 pt. type in capital letters.
	Example: ANALYZE or MAIN
	screen or menu.
Key presses:	<key> The particular keystroke to
	enter is placed between < and >.
	Example: <enter> or <escape> or
	<▲> (UP key) or <▼> (DOWN
	key.
	Only when the keystroke is to be
	entered will it be placed between
	the brackets. If discussing a

Teledyne Analytical Instruments 31