Operation
________________________________________________
Reenter a new Password 'A' 'A' 'A'
________________________________________________
Note that the new password has been replaced by 'A' as placeholder characters. This is to ensure that the wrong password is not mistakenly entered.
<▲▼> Use the ▲▼ keys to reenter the letters of the new password.
<Enter> Press <Enter> to advance to the next letter
<Enter> If the repeated password matches the previously entered new password, the new password is set, the 4060 resumes the ANALYSIS SCREEN after displaying a brief message 'Password Changed'.
<Escape> Steps back to the previously entered letter or, if on the first letter, returns to the CHANGE PASSWORD menu.
Note: If you log off the system using the LOGOUT function in the MAIN MENU, you will now be required to reenter the password to gain access to most menus.
4.4.7 Logging Out
The LOGOUT function provides a convenient means of leaving the analyzer in a password protected mode without having to shut the instrument off. By entering LOGOUT, you effectively log off the instrument leaving the system parameters protected until the password is reentered. The system will continue analysis, however.
To log out:
<▲▼> From the MAIN MENU scroll to field of LOGOUT function.
<Enter> Press <Enter> to logout .
The screen will display the message:
________________________________________________
Restrict Access?
ENTER=Yes ESCAPE=NO
________________________________________________
Teledyne Analytical Instruments | 44 |