Teledyne HPM-2002-OBE RS232/485 Output Module, HPM-2002-OBE DeviceNet Module, Specifications

1.5. HPM-2002-OBE RS232/485 Output Module

The RS232/485 module consists of a power conversion/sensor transducer board, microprocessor board and a user interface option board. Serial communication is conducted via an RJ-11 type connector. With RS232 option (EIA-232 Rev. E) communication can easily be established between the module and the serial port of a PC. The RS485 option allows the user to address multiple units and allows operation at distances of up to 4000 feet. The RS232/485 module includes a four digit floating-point LED display.

1.6. HPM-2002-OBE DeviceNet Module

The DeviceNet module consists of a power conversion/sensor transducer board, microprocessor board and a user interface option board. All communication is conducted via a 5-pin “Micro” style with center pin, male pin contacts. The module has passed the ODVA DeviceNet test and conforms to the vacuum/pressure gauge device profile, an Electronic Data Sheet (EDS) with limited features is also available upon request.

1.7. Specifications

Measuring range	1x10-4to 10+3 Torr
..............................................................................................................................	1.3x10-4to 1.3x10+3 mbar
Accuracy (N2, T=23°C)	+ 20% of reading (1 x10-3to 50 Torr)
............................................................................................................	+ 1.5% of reading (50 to 1000 Torr)
Ambient temperature operating range	0° to 50°C
Process control	2 TTL outputs (1 TTL remote zero command input)
Digital readout	Four digit LED
Equipment operating ranges	12-30 VDC
Transducer mounting	Any position without recalibration.
Transducer internal volume	< 1.5 cc
Wetted material	Au, Si3N4, Si, PyrexTM,
....................................................................................................................	KovarTM, 316 stainless steel and
....................................................................................................	High Temp/Low Outgassing UHV Epoxy
Weight (OBE & HPM-2002s tube)	12 oz (1/8” NPT tube)
Calibrated for nitrogen	Conversion Factors for other gases are selectable
Burst Pressure (Tube)	150 psig
Proof Pressure (*)	30 psig
Nominal Operating Pressure (Tube)	1x10-4to 10+3 Torr
Input Operating Range	11.5 to 30 VDC
Input Power	24 VDC @ 125 mA

* Maximum pressure above which may cause permanent damage.

HPM-2002-OBEVacuum Gauge Page 6 of 39