Telex BP-1002, BP-2002 operating instructions Introduction

INTRODUCTION

The Audiocom® BP-1002 and BP-2002 are microprocessor controlled one- and two- channel

intercom belt packs. An internal switch and jumper setting allows the units to be used with Clear-Com®components, if desired. Other internal switch and jumper settings allow the unit to be uniquely configured to the operator’s requirements.

FCC STATEMENT

This equipment uses, and can radiate radio frequency energy that may cause interference to radio communications if not installed in accordance with this manual. The equipment has been tested and found to comply with the limits of a Class A computing device pursuant to Subpart B, Part 15 of FCC Rules which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area may cause interference which the user (at his own ex- pense) will be required to correct.

This product meets the Electromagnetic Compatibility Directive, 89/336/EEC.

®Audiocom is a registered trademark of Telex Communications, Inc., Burnsville, Minnesota 55337

®Clear-Com is a registered trademark of Clear-Com

Intercom Systems

3