Telex ELECTRO-VOICE X-Line TM manual Flying with Stacking Dollies, Electro-Voice

Step 1: Roll stack of boxes into position and attach the top box to the grid using the two grid straps at the front and two grid hinges at the rear. Attach rigging chain at the front to achive the desired vertical angle.

Step 5: Lift the entire array of boxes.

Step 2: Lift boxes off dolly.	Step 3: Roll another stack of boxes
	into position under the suspended
	array. Attach rigging chain at the
	front to achive the desired vertical
	angles for the next stack.

Step 6: Roll another stack of boxes	Step 7: Land the suspended array
into position under the suspended	on top of the next stack. Attach
array. Attach rigging chain at the	the rear hinges between the two
front to achive the desired vertical	stacks. Attach rigging chain at the
angles for the next stack.	front between the two stacks to
	achive the desired vertical angles.

Figure 9:

Flying with Stacking Dollies

Step 4: Land the suspended array on top of the next stack. Attach the rear hinges between the two stacks. Attach rigging chain at the front between the two stacks to achive the desired vertical angles.

Step 8: Lift the entire array of boxes.

23 ELECTRO-VOICE®￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿