Telular EVDO manual Phone/Fax

Voice and Fax Options (SX7T Only)

￿For RJ-11 Jack Mode (4) select the appropriate combination of J1 Voice, J2 Voice or J2 FAX, J2 Data.

￿ Click Save (5), and then click Restart (6) to save your settings and restart the SX7T.

2.Plug an RJ-11 cable into the Phone/Fax input on the back panel.

Phone/Fax

3.Connect the other end of the RJ-11 cable into your fax machine’s RJ-11 input jack.

4.If the fax machine has a handset, lift it off the receiver and listen for a dial tone. (Depending on your fax machine, you may also press TALK, ON, Hook, or Speaker.)

5.If you hear a dial tone, send a test fax to confirm your service is active.

Note

The SX7T is only compatible with Group 3 (G3) fax machines transmitting at 2,400 to 14,400 bps/baud.

Please confirm your SX7T and fax machine settings before calling your service provider or TelularTech Support.

Wi PATHTM SX7 19 User Guide