Voice and Fax Options (SX7T Only)
Voice/Fax Programming
The Telular Device Manager allows you to program all the voice and fax options for service on your SX7T.
1.From your Web browser, launch the Telular Device Manager. (See “Using the Telular Device Manager” on page 6.)
2.From the home page, click PSTN (1).
3.Click Basic, Call Control, and POTS Setup (2) to display the programming pages (see “PSTN Options” on page 36 for examples of each page).
2
1
3
4
4.Select your desired settings (see table below), click Save (3), and then click Restart (4) to save the settings to your SX7T.
PSTN Settings
Basic
| Select a setting for the phone jack: |
| Voice Always to use the jack for voice calls only (default |
| setting). |
| FAX Next Call to set the jack to send or receive a fax |
MT Call Type | with the next call (reverts to previous setting after call). |
| FAX Always to use the jack for fax calls only. |
| Data Next Call to set the jack to send or receive Circuit |
| Switched Data (CSD) with the next call (reverts to |
| previous setting after call). |
| Data Always to set the jack for CSD data calls only. |
|
|
| Allows the unit to be used with TTY (TeleTypewriter) |
TTY Mode | devices for the deaf or hard of hearing. Modes include |
TTY VCO (voice carry over), TTY HCO (hearing carry | |
| over), and TTY Only. |
Wi PATHTM SX7 | 20 | User Guide |
