Texas Instruments manual Using The TPA701 MSOP EVM Stand-Alone, Details

Using The TPA701 MSOP EVM Stand-Alone

3.4 Using The TPA701 MSOP EVM Stand-Alone

Using the TPA701 MSOP Audio Power Amplifier Evaluation Module stand-alone is much the same as using it with the platform. The same 2.5-V to 5.5-V power supply range and the isolated OUT+ and OUT± lines for BTL operation requirement exists.

Note that the mute signal applied to the EVM shutdown pins must be able to supply enough current to overcome the pulldown resistors on the modules (20 kΩ 20 kΩ for two EVMs).

3.4.1TPA701 MSOP EVM Connected for BTL Output

Figure 3±8. TPA701 MSOP EVM Connected for Stereo BTL Output

5 VDC

Vdd GND

Shutdown

S1

			+
	R1		²
		U1		C4
C1
R2
C2				R3
				C5

C3

OUT±

GND

OUT+

Right

Audio

Input

(Right)

External Mute

TEXAS

INSTRUMENTS

IN

GND	SLOP213
	TPA701 MSOP EVM
	5 VDC		GND
		Vdd	GND
Shutdown

Control

(active high)

S1

			+
	R1		²
		U1		C4
C1
R2
C2				R3
				C5

C3

OUT±

GND

OUT+

Left

Audio

Input (Left)

	TEXAS
	INSTRUMENTS
IN	SLOP213
GND
	TPA701 MSOP EVM

² Due to the very small size of the MSOP IC package, the standard part number TPA701 is replaced with the code TIABA.

Details 3-11