Texas Instruments TPA701 manual Quick Start, Msop Evm, Chapter, Page, Topic

Chapter 2

Quick Start

The steps in this chapter can be followed to quickly prepare the TPA701 MSOP audio amplifier EVM for use. Using the TPA701 MSOP EVM with the TI Plug-N-Play Audio Amplifier Evaluation Platform is a quick and easy way to connect power, signal and control inputs, and signal outputs to the EVM, using standard connectors. However, the audio amplifier evaluation module can be used stand-alone by making connections directly to the module pins, and it can be wired directly into existing circuits or equipment.

The platform switch and jumper settings shown in Table 2±1 are typical for the TPA701 MSOP EVM. They will cause the TPA701 device to shutdown when a plug is inserted into platform headphone jack J10.

Table 2±1. Typical TI Plug-N-Play Platform Jumper and Switch Settings for the TPA701

MSOP EVM

EVM	JP6	JP7	JP8	S2	S3
TPA701	Mute	X	Hi	Note 2	X

Notes: 1) X = Don't care

2)Set S2 to ON when signal conditioning board is installed in U1; set S2 to OFF when no signal conditioning board is installed.

Topic		Page
2.1	Precautions	. 2±2
2.2	Quick Start List for Platform	. 2±3
2.3	Quick Start List for Stand-Alone	. 2±4

2-1