Oven Features

CM Oven Care and Use Manual

Interpreting the Control Panel: Sights & Sounds

The directions in the Care and Use Manual for setting the oven and its various modes are based on the assumption that the panel displays and sounds will “lead” or help you set the controls easily. To aid in this path the following descriptions provide a basis for interpreting what is seen and heard.

Flashing Symbols or Numbers

Signals an incomplete setting; calls for another step or START to be touched.

I Beep

Signals the receipt of an entry.

2 Beeps

Signal an error in entry.

4 Chimes

Signal the end of a setting.

Probe Symbol

Displays the internal temperature of the meat rather than the oven roasting temperature. Oven temperature can be seen briefly by touching the cook mode after touching START.

Lock Symbol

Displays during the Microwave, CookSmart, and Self Clean modes whenever the door is locked. Door can be opened when symbol no longer appears.

PAU

Displays when a Microwave or Cooksmart program is paused or interrupted and door unlocks.

UPPER

LOWER

(Double oven models only) Selects the active oven to be set by highlighting the oven in the mode display window.

Default Settings

The cooking modes automatically select a suitable temperature. These can be changed when a different one is needed.

START

Touch to complete an entry and before entering an additional one.

UPPER OFF and LOWER OFF

Touch to cancel a mode that has already been started or completed.

COOK TIME

Sets the number of hours and minutes the oven will be “on”. Unlike Timer 1 or 2, the oven turns “off” automatically when the time elapses. This pad is used with the automatic timed oven control.

F Number Codes

These codes are displayed when there is a problem with the signal sent to the electronic control board. See Solving Operational Problems, Page 58.

Err

Displays if an invalid temperature or time is entered.

Power Failure

After the power returns to the oven, the clock displays the time when the power was lost or turned off.

Convection Fan

Operates during any convection mode. The fan turns off if the door is opened.

Component Cooling Fan

Activates during any cooking or self-cleaning mode to cool inner components and outer door surfaces. This air is exhausted through the vent located below the lower oven in double oven models. It continues to run until components have cooled sufficiently.

Page 9