Thermador PRDS304, PRDS36, PRG304, PRDS48 Cabinet Preparation, Side View 30, 36 and 48 Ranges

STEP 2: CABINET PREPARATION

FIG. 2a	Side View 30" Ranges		FIG. 2b	Side View 36" and 48" Ranges
		- Com	////	//// //// ///S //// -—Com-
		bustible
	28-3/4'	Materials &
	27-5/8"
	Optional
	High
AY Mln. to	Shelf		42" Mln. to
Combustibles A	Std. __		Combustibles A
	Low Back
	Guard
	(Provided
	with 30" Range)

Clearance

s/ss ss/s //

16-1/2"—> 26-3/8' »►

+— 24-3/8" *-

A as defined in the 'National Fuel Gas Code* (ANSI Z223.1. Current issue).

FIG. 2c Side View 30", 36" and 48" Ranges

Combustibles A

Com-

buHtbte

Materials A

12" Min. to Combustibles A without Backguard or with island Trim

Island

Trlrr

1-1/2*

Clearance

CAUTION:

Do not install the Model PRDS304 and PRDS48 ranges such that the front surface of the oven door is flush with the cabinet face. A flush installation could result in damage to the cabinets due to high heat. The face of the cabinet should line up with the oven front frame. The front frame location relative to the rear of the range is 24-3/ 8" on the PRDS304 and 25" on the PRDS48, as shown in Figures 2a and 2b.

'//// \ 777/ //// ////

30" Ranges - 26-3/8"

36" & 48" Ranges - 28"

Page 5