Test Oven Burners, Test Bake Burner Ignition

Step 9: Burner Test and Adjustment

Test Oven Burners

Remove the oven bottom cover. Remove the 4 screws that attach the cover to the bottom of the oven, then lift the cover and angled baffle plate out to expose the U- shaped bake burner.

Test Bake Burner Ignition

Set the oven to BAKE at 350°F. After a short delay, the burner will ignite. The burner will stay lit until 350°F is reached and then shut off. From this point forward, the burner will cycle on and off to maintain the tempera- ture.

Test Bake Burner Flame

While the bake burner is lit, inspect the flame. See Figure 9 for proper flame characteristics. If the flame burns completely or mostly yellow, it is necessary to adjust the bake burner air shutter. See Figure 10 and the Flame Adjustment procedure in the following section.

Test Broil Ignition

Set cooking mode to BROIL. The broil burners will ignite after 30-75 seconds.

Flame Adjustment (if necessary):

Tube-style gas burners used in Thermador© appli- ances have air shutter systems which are similar to the illustration in Figure 10, and can be adjusted using the following method (unless adjustment is not rec- ommended). It is necessary to remove the burner from the appliance in order to perform air-shutter adjustments.

•Loosen shutter screw(s) and turn shutter to new position.

•Adjust the shutter to more-closed position if the flame is lifting or blowing, or is not carrying over. Adjust the shutter to more-open position if the flame is too yellow. (See Figure 10.)

•Re-tighten the shutter screw(s).

•After adjustment, re-install the burner and perform flame evaluation. The air shutter must fit over the orifice hood for proper operation of the burner.

•Repeat procedure as needed until flame char- acteristics are acceptable. (See Figure 9.)

NOTE: The two infrared ceramic broil burners do not have air shutters, so no adjustment is provided.

Replace oven bottom cover. Slide cover into place and reattach to bottom of oven cavity.

WARNING

Burner adjustments must be performed by a qualified technician. Improper adjustments may cause harmful by-products or void the appliance's warranty.

Allow burners to cool before attempting to remove them!

FIG. 10 Air Shutter Adjustment (if necessary)

	Air	Screw
More Open:	Air
More Open:	Shutter
Less Yellow Flame
More Closed:
Less Blue Flame
More Carryover
Less Lifting or Blowing

Call Thermador® if:

1.Any of the burners do not light.

2.The broil burner or bake burner flame goes out before the oven heats to the desired temperature.

3.Any of the burners continue to burn yellow.

PG36, PG48, PRO-GRAND, PG30 specifications

The Thermador PG30 is a versatile and high-performance gas cooktop that combines luxury and functionality, making it a preferred choice for both professional chefs and home cooks. Designed with precision and quality, the PG30 stands out in the crowded kitchen appliance market.

One of the most appealing features of the Thermador PG30 is its powerful burners. The cooktop is equipped with four different burners, each designed to deliver consistent and robust heat. Among them, a star-rated burner can reach up to 18,000 BTUs, allowing for quick boiling and high-temperature cooking. This high-performance capability is perfect for searing meats or achieving the perfect stir-fry.

Another key technology integrated into the PG30 is the patented Star® Burner design. This innovative feature promotes even heat distribution across the bottom of cookware, eliminating hotspots and ensuring that your dishes are cooked to perfection. Additionally, the burners are designed for easy flame adjustment, allowing for precise control over heat levels during cooking.

The PG30 also features a sleek stainless-steel surface, which not only enhances its aesthetic appeal but also makes it easier to clean. The surface is resistant to scratches and stains, maintaining its sophisticated appearance over time. Cooktop grates made from cast iron provide durability and support for heavy pots and pans while adding a professional touch to your kitchen.

Safety is paramount in the design of the Thermador PG30. The cooktop is equipped with a variety of safety features, including automatic re-ignition. This technology ensures that if a flame is accidentally extinguished, the burner will automatically reignite, preventing the buildup of gas. The cooktop also includes a child lock feature, which adds an extra layer of safety in homes with young children.

Lastly, the Thermador PG30 is compatible with various types of cookware, making it an excellent choice for culinary enthusiasts who prefer diverse cooking methods. Whether you use cast iron skillets, stainless-steel pots, or non-stick pans, the PG30 delivers exceptional performance with every use.

In summary, the Thermador PG30 gas cooktop combines advanced cooking technology, safety features, and stunning design to provide a top-tier cooking experience. It is an excellent addition to any modern kitchen, appealing to those who value quality, efficiency, and style in their culinary appliances.

Thermador PRO-GRAND Test Oven Burners, Flame Adjustment if necessary, Test Bake Burner Ignition

Models: PG36 PG48 PRO-GRAND PG30