Thermador SMW272 manual Do-It-Yourself Maintenance, Replacing the Oven Light

SMW Oven Care and Use Manual Lower Oven Maintenance

Do-It-Yourself Maintenance

REPLACING THE OVEN LIGHT

WARNINGS:

To prevent electrical shock and or personal injury:

•Before replacing the light bulb, be sure the electric power is turned off at the circuit breaker.

•Do not operate the oven unless the light cover is securely in position.

•Halogen bulbs get HOT instantly when turned ON.

•Be sure the oven and light bulb are cool.

CAUTION: If the light cover is damaged or broken, do not use the oven until a new cover is in place.

The oven lights are located on the left and right side walls of the oven. The lights have a removable lens cover and a halogen light bulb. The ceramic light socket housing is not removable by the user.

•Replace bulb with a 12-Volt, 10-Watt Halogen bulb only.

Before replacing bulbs, turn off oven circuit.

To replace Halogen Bulb:

1. Remove oven racks.

6.Remove the bulb by grasping and sliding the bulb straight up until the two prongs have cleared the ceramic holder.

7.Do not touch the glass of the new replacement bulb with your fingers. It will cause the bulb to fail when it first lights. Grasp the replacement bulb with a clean paper towel or facial tissue with the prongs facing down. Locate the two prongs in the ceramic holder, gently poking until the two prongs locate in the ceramic socket.

8.Press down to seat the bulb.

9.Snap the protective glass lens cover over the bulb housing.

10.Turn on circuit breaker.

24-HOUR CLOCK OR CENTIGRADE FORMAT

Your oven has been preset to a 12-hour clock format and F° temperature. Two people will be needed to change the clock to a 24-Hour format or a temperature to C°.

2.Slide the tip of a table knife blade between oven wall and the center of the side of the protective glass lens cover.

Lens Cover

Light Bulb

Light

Socket

1.	Turn electric power to the oven OFF at the
	circuit breaker.
2.	While touching the TIMER 1 or TIMER 2
	pad, turn power on at breaker. Number 12
	and F will appear in the clock window. Release
	TIMER pads.
3.	Touch BAKE pad and 24 replaces 12 in the
	clock window. This will toggle with repeated
	touches of BAKE.
4.	Touch BROIL pad and C replaces F. These

3.Support the glass lens cover with two fingers along the bottom edge to prevent the cover from falling to the bottom of the oven.

4.Gently twist the knife blade to loosen the glass lens cover.

5.Remove the glass lens cover.

	will toggle with repeated touches of BROIL.
5.	To complete the change, touch OFF pad.
6.	Set the correct Time of Day, see Page 30.

Page 54