Thermador UCV36, UCV45 Introduction, The complete Universal Cook‘n‘Vent, style cooktop or range

Figure 1	Top Cap
	Filters
Snorkel
	Blower Assembly
Support Leg	J-Box
	Wing Nuts

INTRODUCTION

GENERALDESCRIPTION

The complete Universal Cook‘n‘Vent®

System consists of the ventilator intake and a blower. See Fig. 1. The blower is either an integral (mounted on the vent intake in the cabinet under the cooktop) or a remote (roof or outside wall mounted). When a remote blower is used, a duct transition is mounted on the ventilator intake in place of the integral blower to connect the intake to the ductwork. The duct transition must be purchased separately. (see Table 1 . )

The integral blower or duct transition can be mounted in different positions on the intake to route ductwork to avoid cabinet, building framing, utilities, etc. Important: To allow for cleaning access, locate blower

in the position closest to the duct outlet.

The Universal Cook‘n’Vent® System is available in 30-inch, 36-inch and 45-inch models, with countertop trim in either stainless, black, or white. It is intended for use with any residential 30-inch, 36-inch or 45-inch model (Thermador or other) gas or electric cooktop. It is not intended to be used with any professional

style cooktop or range.

Page 2