UNIVERSAL COOK’N’VENT ®
INSTALLATION INSTRUCTIONS
MODELS: UCV30 • UCV36 • UCV45
Rating: 120 Volt, 60 Hz., 10.0 Amps.
For Integral Blower Installations:
•Requires Integral Blower: Model # VTN600CVA
•Requires Round Duct Size (6" Diam.)
•Requires Dedicated Branch Circuit Power Supply • 120 Volt AC• min. 15 Amps., 3 prong receptacle • 60 Hz.
•See Steps 3 and 5 for electrical receptacle and duct outlet location
For Remote Blower Installations:
•Requires Remote Blower: Model # VTR1000Q or VTR600R
•Requires Duct Transition: Model # CVT314 (for
•Requires 4 wires and 1 ground wire connecting blower and vent
•Requires Dedicated Branch Circuit Power Supply • 120 Volt • 15 Amps.,
3 prong receptacle • 60 Hz., AC.
For CVT314:
•Recommend
•Recommend
For CVT7:
•Recommend 7" diam. to 10" diam. transition for VTR1000Q Remote Blower
•Recommend 7" diam. to 8" diam. transition for VTR600R Remote Blower
•See Steps 3 and 5 for electrical receptacle and duct outlet location
INSTALLATION MUST COMPLY WITH ALL APPLICABLE CODES.
PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.
IMPORTANT: Save these instructions for the local electrical inspector's use. INSTALLER: Please leave these Installation Instructions with this unit for the owner.
OWNER: Please retain these instructions for future reference.
SAFETY WARNING: Disconnect power by removing plug from receptacle before installing or servicing this unit.