NXA-CFSP Compact Flash

NXA-CFSP Compact Flash

Overview

Every MVP panel is shipped with a 64 MB Compact Flash card.

Compact Flash Card - Security

All security user names and passwords (for the docking station) are stored in the Compact Flash card. After installing the Compact Flash card upgrade, all security user names and passwords need to be re-entered to enable security. For this reason, it is recommended that you upgrade the card prior to setting up the security information for the docking station.

The NXA-CFSP Compact Flash card is factory programmed with panel firmware and can be upgraded up to 1GB:

Optional Compact Flash Upgrades

NXA-CFSP128M - 128 MB Compact Flash

(FG2116-36)

card

 

 

 

NXA-CFSP256M - 256 MB Compact Flash

(FG2116-37)

card

 

 

 

NXA-CFSP512M - 512 MB Compact Flash

(FG2116-38)

card

 

 

 

NXA-CFSP1G - 1 GB Compact Flash card

(FG2116-39)

 

 

Installing the NXA-CFSP Compact Flash Card

Batteries should be removed prior to upgrading the Compact Flash card.

Accessing the MVP’s Internal Components

1.Remove all connectors, remove power and remove batteries.

2.Remove the two housing screws (FIG. 5).

3.Grasp the bottom rim of the rear housing just above the MVP interface connector, and carefully pull the bottom rim away from the IR Emitter and up, to expose the internal components.

4.Remove the trim from the top rim of the circuit board (FIG. 5).

MVP-7500/8400 Modero Viewpoint Wireless Touch Panels

7

 

 

Page 21
Image 21
AMX MVP-7500/8400 manual Compact Flash Card Security, Installing the NXA-CFSP Compact Flash Card